Boat Registration Numbers from StickyLife are made to comply with USCG Federal Requirements for vessel identification. Each order comes with two complete sets of pre-cut, pre-spaced, waterproof vinyl numbers that are masked with transfer tape and ready to apply right out of the package. Numbers are 3" high, set in the required block lettering style using the Arial font, and are available in more than 35 colors so you can choose a shade that contrasts clearly with your hull color as required by law.
If you want something beyond plain registration numbers — different sizes, multiple colors, or custom graphics — our vinyl lettering tool gives you more flexibility. Keep in mind that custom lettering orders are not guaranteed to meet federal or state requirements, so use that tool only if your registration has already been handled elsewhere. StickyLife is not responsible for lettering that does not comply with applicable federal or state requirements.
Boat Numbers Features & Benefits
- Meets USCG federal requirements: Numbers are 3" high, block style, Arial font — sized and formatted to meet federal baseline standards for recreational vessel registration display.
- Two complete sets included: Every order includes two sets of your registration numbers, one for each side of the bow as required.
- Pre-spaced and pre-masked: Numbers arrive properly spaced and covered with transfer tape so installation is straightforward — no measuring or guesswork needed.
- Waterproof self-adhesive vinyl: Built to hold up on a boat hull exposed to water, sun, and outdoor conditions.
- 5 or more year durability: Rated to last 5 or more years with normal marine use.
- More than 35 color options: Choose a color that clearly contrasts with your hull so your numbers are easy to read from a distance, as required by law.
- Easy application instructions included: Every kit ships with step by step instructions so you can apply your numbers correctly the first time.
Technical Details
- Product: Boat Registration Numbers
- Material: Self-adhesive waterproof vinyl
- Letter height: 3" (meets USCG minimum requirement)
- Font: Arial (plain block lettering style)
- Set dimensions: Each set measures approximately 3" x 22"
- Sets per order: Two complete sets (one per side of bow)
- Application: Pre-spaced and pre-masked with transfer tape, ready to apply
- Durability: 5 or more years
- Color options: 35 or more colors available
- Compliance: Formatted to meet USCG federal registration display requirements — verify your state's specific rules before ordering
FAQs
Do these numbers meet federal and state requirements?
These numbers are formatted to meet USCG federal requirements, which specify that registration numbers must be at least 3" high, displayed in plain block lettering, and in a color that contrasts clearly with the hull background. The USCG standard applies in all states. However, many states have additional rules about placement, spacing, and how the state prefix and validation decal are displayed. StickyLife is not responsible for lettering that does not comply with applicable requirements. If you have any doubt about your state's specific rules, check with your state boating authority before ordering.
What do I get with each order?
Every order includes two complete sets of your registration numbers — one for each side of the bow. Each set is pre-cut, pre-spaced, and pre-masked with transfer tape. Application instructions are also included.
What color should I choose for my boat registration numbers?
Federal and state requirements specify that your registration numbers must contrast clearly with the color of your hull. If your boat is white or light colored, black or dark numbers are the most common choice. If your hull is dark, white or a bright color works well. Avoid choosing a number color that is similar to your hull color, as this will make the numbers hard to read and may not meet legal requirements.
How do I apply the numbers to my boat?
Clean the hull surface where the numbers will go and let it dry completely. Peel the paper backing off your set of numbers and position them on the hull. Press firmly and smooth the transfer tape down from one end to the other to eliminate air bubbles. Once the numbers are adhered, slowly peel away the transfer tape at a low angle. The vinyl adhesive is stronger than the tape, so the numbers will stay on the hull as the tape is removed. Application instructions are included with every order.
Where exactly do the numbers go on the boat?
Federal requirements state that registration numbers must be displayed on both sides of the forward half of the vessel, which typically means on or near the bow. Numbers must be in plain sight and read from left to right on both sides. Your state may have more specific placement rules — check with your state boating agency to confirm exact positioning for your vessel type.
What if I want a different style or size than what this product offers?
If you want a different font, multiple colors, or a custom layout, our vinyl lettering tool gives you more creative control. Keep in mind that custom lettering is not guaranteed to meet federal or state registration requirements — use it only if your registration has already been handled or if you need lettering for a non-compliance purpose. For designs that include graphics along with text, the pro vinyl decal tool is a better fit.
